Sale!

Wetness 3140 Speed Clear Kit

$69.99$189.99

 

Includes Clear & Activator

  • Gallon Kit makes: 1 gallon (sprayable)
  • Quart Kit makes: 42oz (sprayable)
  • 3:1 mix
  • 40% solids
  • 100% DOI w/ excellent gloss

TDS

Description

Wetness 3140 Speed Clear coat has exceptional leveling characteristics, excellent gloss retention and D.O.I. It is “water” clear, formulated with innovative resins and UV stabilizers to provide a durable, long‐lasting finish. Wetness 3140 Speed Clear coat is ideal for spot or single panel refinishing and utilizes a variable speed catalyst system (the same catalyst as our 2145) to provide consistent performance in a variety of weather conditions.

SUITABLE SUBSTRATES

Solvent-borne Basecoat

Waterborne Basecoat

2k Enamel

Mixing Ratio
3 Parts 1 Part
W-3140 WA-60 (60°F – 75°F)
WA-75 (75°F – 90°F)
WA-90 (90°F+)

NOTE: Make sure product is at room temperature (72°F) before mixing.

APPLICATION
  • Apply basecoat color according to manufacturer’s recommendations
  • Apply two wet coats of Wetness‐3140, allowing 3-5 minutes flash time between coats

 

Dry Times
Air Dry @ 70°F Dust Free 5-7 Minutes
To Sand 1 1/2 to 2 Hours
To Deliver 3-4 Hours
Force Dry Purge Time 10 Minutes
15-20 minutes @ 140°F/60°C (metal temp with SLOW only)
Buffing Times Air Dry 2 1/2 to 3 Hours
Force Dry After Cool Down

 

 

 

 

NOTES
  • Wetness 3140 can be reduced 5% with Reducer
  • Adding reducers will decrease dry film thickness
  • Adding standard grade urethane reducers will increase VOCs
  • A minimum of 2 mils dry‐film‐thickness is required for optimum UV resistance

 

SURFACE PREPARATION
  • Apply basecoat color per manufacturer’s recommended procedures.
  • Allow 15 minutes dry time per coat before applying clearcoat.
  • In temperatures below 70°F, a longer dry time is necessary for each coat of basecoat.
  • Thoroughly tack surfaces to be painted with a clean tack cloth before applying clearcoat.

RECOAT INSTRUCTIONS If recoating after 24 hours, then sand with 1000 grit sandpaper before recoating. On sand‐thru areas, apply heat before recoating to eliminate featheredge lifting.

Technical Data
Mix Ratio 3:1 (5%Reducer Optional)
Pot Life 45 minutes @ 72°F/22.2°C, 50% relative humidity
Gun Setup 1.2mm – 1.4mm
Air Pressure 8‐10 psi HVLP
40‐45 psi Conventional
% Solids by Weight 40% (Sprayable, no reducer)
Shelf Life (Unopened) 12 months

SDS

Additional information

Weight N/A
Dimensions N/A
Activator Temp

Fast 60-75, Medium 75-90, Slow 90+

Size

Quart, Gallon

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.