Sale!

Ultimate 4132 Universal Clear Coat Kit

(2 customer reviews)

$32.99$89.99

Includes Clear & Activator

  • 4:1 mix
  • 32% solids
  • Excellent 100% DOI Gloss

 

Clear

Description

Ultimate 4132 Universal Clear coat is a two component, urethane clearcoat designed for spot, panel and overall refinish jobs. It is fast-drying, easy to use and provides a durable finish with excellent gloss. It is National Rule compliant.

SUITABLE SUBSTRATES

Solvent-borne Basecoat

Waterborne Basecoat

2k Enamel

 

 

Mixing Ratio

4 Parts 1 Part
UC-4132 UA-60 (60°F – 70°F)
UA-80 (70°F – 80°F)
UA-90 (80 – 90°F+)

NOTE: Make sure product is at room temperature (72°F) before mixing.

APPLICATION
  • Apply basecoat color according to manufacturer’s recommendations
  • Apply 2 – 3 flowing coats of Ultimate 4132 Universal clear coat (2.2 – 3.6 mils @ 1.2 mils per coat)
  • Flash for 10 – 15 minutes depending on activator used.
  • Keep spray gun nozzle 6 – 10 inches from the vehicle to avoid entrapment of air in paint film.
  • Always keep containers tightly closed to prevent moisture contamination.
  • Clean equipment thoroughly after use.

 

Dry Times
Air Dry @ 77°F Dust Free 15-30 Minutes
To Deliver 2+ Hours
Force Dry Purge Time 15 Minutes
30 minutes @ 140°F/60°C (metal temp)
Buffing Times Air Dry 2+ Hours
Force Dry 1-2 Hours After Cool Down

 

 

 

 

NOTES
  • Do not flash for more than 1 hour between coats. If more than 1 hour @ 70°F (21°C) is reached, wait at least 5 hours and scuff with a red or gray scuff pad before applying more clear or basecoat. Lightly scuff surface and degrease before application.
  • A minimum of 2.2 mils dry‐film‐thickness is required for optimum UV resistance.

SURFACE PREPARATION
  • Apply basecoat color per manufacturer’s recommended procedures.
  • Allow 15 minutes dry time before applying clearcoat.
  • In temperatures below 70°F, a longer dry time is necessary for each coat of basecoat.
  • Thoroughly tack surfaces to be painted with a clean tack cloth before applying clearcoat.

RECOAT INSTRUCTIONS If recoating after 24 hours, then sand with 1000 grit sandpaper before recoating. On sand‐thru areas, apply heat before recoating to eliminate featheredge lifting.

Technical Data
Mix Ratio 4:1
Pot Life 6 hours @ 77°F/25°C, 50% relative humidity
Gun Setup 1.2mm – 1.4mm
Air Pressure 8-10 psi HVLP
40-45 psi Conventional
% Solids by Weight 32% (Sprayable, no reducer)
Shelf Life (Unopened) 12 months

 

Additional information

Weight N/A
Dimensions N/A
Activator Temp

Fast 60-70, Medium 70-80, Slow 80-90+

Size

Quart, Gallon

2 reviews for Ultimate 4132 Universal Clear Coat Kit

  1. Alan H. (verified owner)

    Best buy for the cash

  2. Jason C. (verified owner)

    Great product. Had amazing results with this.

Only logged in customers who have purchased this product may leave a review.